Fulfilment of Totex drivers with BioSelector
The BioSelector range of dosing units are a popular bolt on technology for optimising your existing treatment works.
The technology helps to facilitate the fulfilment of TOTEX drivers and will reduce BOD, COD, Ammonia and suspended solid levels. The units can be used all year round to assist with seasonal PE fluctations or for improved winter nitrification.
The physical impact on FOG and the improvement in settlement can be seen in the visual changes shown in the images below
Move the slider left and right to see the difference over a 3 month period.
BioCube
The most popular of the BioSelector range is the BioCube. The BioCube willl treat up to a population equivalent of 5,000.
Incorporating a fully automatic control system, bacteria usage is monitored and operators alerted when the bacteria should be replaced.
Requiring very little installation or power the units can also be used as temporary recovery systems. Where population equivalents exceed 5,000 multipl units can be installed.
Benefits of the BioCube
- Meets TOTEX drivers and optimises existing processes without capital upgrade
- Sloughing brought under control
- Improved settlement in primary settlement tanks
- Improves overall performance
- Reduces BOD, COD and solids levels
- Eliminates fat, oil and grease build up and fat burgs
- Reduces the load going forward to biological treatment systems
- Treatment occurs online with no down time or negative effects on site consents or performance
- Reduces mechanical failure rates and associated costs
- Reduces the need for air in biological systems and helps to reduce costs on site through optimising the efficiency of the full system
- Meets TOTEX drivers and optimises existing processes without capital upgrade
- Sloughing brought under control
- Improved settlement in primary settlement tanks
- Improves overall performance
- Reduces BOD, COD and solids levels
- Eliminates fat, oil and grease build up and fat burgs
- Reduces the load going forward to biological treatment systems
- Treatment occurs online with no down time or negative effects on site consents or performance
- Reduces mechanical failure rates and associated costs
- Reduces the need for air in biological systems and helps to reduce costs on site through optimising the efficiency of the full system
BioCube Innovations
Fully automatic and configurable to breed and control specific bacteria cultures on site.
Simple and easy to install. Bolts on to existing system and easily expandable to meet increasing demands.
Free standing units with a small footprint are easily transportable when moving to new sites.
BioSelector range and specifications
| BioTube | BioCube | |
|---|---|---|
| Population equivalent | 50-500 | 500-5,000 per BioCube |
| Breeder unit capacity | – | 1,000 litres per BioCube |
| Nutrient source method | – | Flume mounted submersible pump |
| Seed bacteria usage | 0.5-2kg per month | 2.8kg per BioCube |
| Bacteria substrate | Pre-activated gel billet | Powder |
| BOD removal | 30%* (average improvement) | 30%* (average improvement) |
| FOG removal | Up to 99% | Up to 99% |
| Ammonia removal | 50% (average improvement) | 50% (average improvement) |
| Installation method | Integrated aeration cultivation tube | Free standing floor mounted adjacent to inlet flume |
| Larger units availale on request *Subject to operational condition of treatment plant |
||
Find out more about BioCube
To find out more about the BioCube simply complete the form below or call us on 01274 593 597.